1.MID认证标准
CEN | EN 14154-1:2005+A2:2011 Water meters - Part 1: General requirements | EN 14154-1:2005+A1:2007 | 31/10/2011 |
CEN | EN 14154-2:2005+A2:2011 Water meters - Part 2: Installation and conditions of use | EN 14154-2:2005+A1:2007 | 31/10/2011 |
CEN | EN 14154-3:2005+A2:2011 Water meters - Part 3: Test methods and equipment | EN 14154-3:2005+A1:2007 | 31/10/2011 |
2.主要测试项目
7.3 | Static pressure test 静压测试1,6MAP (15min) 2MAP (1min) |
7.4 | Determination of intrinsic errors (of indication) / The effects of meter orientationat Q1, Q2, 0,35(Q2+Q3), 0,7(Q2+Q3), Q3, Q4 内在误差确定 |
8.17 | Absence of flow test with water for 15 min Discharge water for 15min 无流量试验用水15分钟 15min后的排放水 |
7.5 | Water temperature test 水温测试 10°C and 90°C At Q2 |
7.6 | Overload water temperature test MAT + 10°C 过载水温测试 |
7.7 | Water pressure test 水压测试 0,3bar + 5% and MAP (0-10%) At Q2 |
7.8 | Flow reversal test / Reverse flow test 0,9Q3 at MAP at 1 min 反向流动测试 After – error Q1, Q2, Q3 |
7.9 | Pressure loss test 压力损失测试 At Q3 |
7.10 | Flow disturbance tests / Verification of flow profile sensitivity classes 流动干扰测试/流动剖面敏感等级的验证 |
7.11 | Endurance tests 耐久测试 (all orientation) |
7.11.2 | Discontinuous flow durability test 间断流动耐久性试验 |
7.11.3 | Continuous flow durability test at 20°C at Q3 – 800hod 连续流动耐久测试 |
7.11.3 | Continuous flow durability test At 20°C Q4 – 200hod 连续流动耐久测试 |
7.12 8.16 | Magnetic field testing Identify localisation (3 position) Only horizontal at 20°C at Q3 磁场测试 确定本地化(3位置)仅在Q3的20°C水平 |
8.2 | Dry heat (non-condensing) “B” (55+2)°C, 2 hod, 1 cycle 干热(非冷凝) |
8.3 | Cold “B” 寒冷 (+5 +3)°C, 2 hod, 1 cycle |
8.4 | Damp heat, cyclic (condensing) “B” (40+2)°C, 12hod, 1 cycle Humidity ˃95% (25+3)°C, 12 hod, 1 cycle Humidity ˃95% 湿热 |
8.6 | Vibration (random) 震动 (mobile version only class “I”) |
8.7 | Mechanical shock 机械冲击 |
8.5.2 | Water meters powered by direct AC or by AC/DC converters |
8.5.3 | Water meters powered by external DC voltage or by primary DC batteries |
8.8 | AC mains voltage dips, short interruptions and voltage variations |
8.9 | Bursts on signal lines |
8.10 | Bursts (transients) on AC and DC mains |
8.11 | Electrostatic discharge |
8.12 | Radiated electromagnetic fields |
8.13 | Conducted electromagnetic fields |
8.14 | Surges on signal, data and control lines |
8.15 | Surges on AC and DC mains power lines |
3.水表MID认证所需要的资料清单:
User manual 说明书 |
Installation Guide 安装指导 |
Bill of material 材料清单 |
Schemetic 原理图 |
PCB Mainboard 主板图 |
Assembly Drawing 组装图 |
Measure Sensor 传感器 |
Seal Position 封装位置图 |
Softmid Questionaire 软件文档 |
Legal Flow chart 计量流程图 |
Reliability prediction 可靠性预测 |
ISO75 test report |
Case material 外壳材料 |
minimum pulses requirement 最小脉冲要求 |
PMP 生产流程 |
MID Annex D certificate |
4.衡硕检测可提供全方位的测试和认证服务,权威欧盟公告机构发证;
OIML-R49认证
CE – MID full compliance (B+D, B+F, H1)
CE – MID 整体符合性认证 (B+D, B+F, H1)
CE – MID Module B approval
CE – MID B模式 认证
CE – MID Module D approval (Factory Audit)
CE – MID D模式 认证 (工厂审核)
CE – MID Module H approval
CE – MID H 模式认证
IEC testing report and international approval
IEC 检测报告和多国认证
China GB standard testing report
中国GB 标准测试报告
Pre-testing (Annex B approval)
预测试(B模式认证)
Pre-audit (Annex D approval)
工厂预审核(D模式认证)
Consultant service
顾问服务
Life model
产品寿命模型评估
Software review
产品软件评估
Single item testing
各种单项测试
衡硕检测拥有丰富的MID认证经验,详情垂询:021-51860170,400-108-5367